产品概述

MiniTest 系列的测厚仪可以对铁磁基底（钢/铁）上的非磁性层（涂料、塑料、铬和其他电镀非磁性层等）以及导电基底（铝、铜、钛、奥氏体不锈钢）上的绝缘层（漆、搪瓷、塑料、阳极氧化铝等

规格参数

DT /NDT	NDT
Substrate	F
Data memory	10 batches for a maximum of 10,000 readings (MiniTest 725 and 735)Memories can be partitioned as needed
Dual sensors	Automatic recognition of the substrate material with FN sensors
Power supply	2 pcs batteries, type AA (Mignon); rechargeable NiMH batteries, type AA/HR6 as an option. Battery or rechargeable battery setting option to adapt to the matching nominal voltage
Measuring rate	70 readings per minute in the single mode 20 readings per second in the continuous mode
Continuous mode	For quick identification of thickness variations
Data interfaces	USB and Bluetooth
Layer Thickness	up to 500 µm
Measuring units	Switchable from metric (µm, mm, cm) to imperial (mils, inch, thou)
Calibration modes	Factory calibration, zero-point-, 2-point-, 3-point-calibration, calibration method “rough“
Norms and standards	DIN EN ISO 1461, 2064, 2178, 2360, 2808, 3882, 19840, ASTM B 244, B 499, D7091, E 376, AS 3894.3, SS 1841 60, SSPC-PA 2
Storage temperature	– 20 °C ... 70 °C
Monitoring of limits	Visual and audible signal output
Operating temperature	– 10 °C ... 60 °C
Statistical evaluation	Number of readings, min, max, mean value, standard deviation, coefficient of variation, single value statistics, blocks statistics (norm-conforming / freely configurable)
Calibration procedures according to international standards	ISO, SSPC, “Swedish“, “Australian“
品牌	ERICHSEN
系列 / 品类	薄膜应用和涂层厚度
产地	德国
制造商	ERICHSEN GmbH & Co. KG

本类目为薄膜应用和涂层厚度。该品类用于材料与表面性能的测试与质量控制，常见于板材加工、涂装、薄膜、包装与金属成型等行业的产品检验与研发验证。

选型时建议明确需执行的测试项目与遵循的行业标准，并据此核对设备的驱动方式与可测样件范围，避免标准覆盖不足影响检测结果的有效性。

使用频次与精度要求会影响机型选择，批量质检场景可优先考虑操作便捷与数据可导出的机型；研发场景则更关注参数可调范围与扩展能力。

我司可协助根据测试项目比对可选机型、说明配套治具与标准符合性，并提供含税含运费报价，欢迎提供样件与测试要求。